Here are three sets of blocks from Week Three
Sunday, November 22, 2015
Tuesday, November 17, 2015
Moda Sampler Block Shuffle Week Two Blocks
Here are new sets from Week Two!
Mona's Blocks |
Linda Kay's Blocks |
Pearl's Batiks |
Georgia's Batiks |
Monday, November 16, 2015
Flying Geese and the No Math Ruler
TOOL U(niversity)
Have you tried the No Math Flying Geese Ruler, a wonderful acrylic ruler to have in your arsenal of quilting gadgets?
Why do I ask, you ask? Because it takes the waste of time and more importantly, FABRIC, out of making Flying Geese.
In the past, to make a FG, you had two methods:
1. cut a large triangle out of one fabric and two smaller ones out a contrasting fabric and sew along the diagonal. This was problematic in that you were sewing on the bias, which always allows a stretch to occur. I don't care how great a sewer you are, or how awesome your machine is, you're gonna get misshapen rectangles. And that brings us to
Method 2. Take a large RECTANGLE and two smaller SQUARES, and sew along the bias. Then cut away the other half of the square. This is a very much safer method to avoid that bias stretch but what a waste of fabric. I don't like wasting fabric. And a waste of time.
All that grrr is gone with the Flying Geese Ruler.
So, to start, you will need the No Math Flying Geese Ruler and 1 large square and 4 smaller squares.
Keep in mind that larger square ends up being the goose and the smaller squares are the backgrounds.
To determine what size to cut, look at the ruler (above) and you will see a list of finished sizes and corresponding squares. (Remember, this is the FINISHED size so your geese will all be 1/2" larger when you make them) For this demonstration, I used "G" (2 1/4" x 4 1/2" finished) and cut one large "G".
If you flip the ruler over, you will see the corresponding smaller dimension. You need to cut 4 of these.
Now, position two smaller squares thusly....
The yellow thing you see is my 1/2" Seams Easy ruler and the blue marking tool leaves a thin line of chalk. I lay the ruler down the diagonal and mark a line on either side of the centerline. I don't bother marking the center at all. The two blue lines are now my sewing lines and I sew just a scant in (towards the center) so that once I have ironed the seam allowance to one side, I won't lose any 'acreage' in the seam. I want a true measurement when I am finished.
I DO pin the smaller squares....
because I don't want them to shift around as I sew
and here's what it looks like when I have sewn down both lines.
Now you can cut the square in half but before you do, I recommend "setting the seam" which means iron the block as it is right now, before you cut it apart, then iron to the dark side.
You will have two heart-shaped blocks.
Place the remaining 2 smaller squares as shown and make the sew-lines, as you did before and sew the scant seams.
Set the seams again and cut down the two center-lines and you will be left with four separate flying geese. Iron to the dark side and you will have something that looks like this:
These geese should (and do) now measure 2.75" x 5" I trim the little ears off the blocks before I use them in a quilt block.
HINT!!!!
Lately, I have taken to making my Flying Geese one size larger and trimming them down to the absolutely correct size because i am striving for complete accuracy. It takes a little longer and a little more fabric but the precision can't be beat!
This is a super fast way to make flying geese. And if you are making the Moda Sampler Block Shuffle quilt, you already know the outer border is packed with geese.
You can find the No Math Flying Geese ruler at Bright Hopes Quilting.
Monday, November 9, 2015
Week One Shuffle Blocks
Subscribe to:
Posts (Atom)